blog

Home / DeveloperSection / Blogs / Some Best Ways For Home Repair & House Painting

Some Best Ways For Home Repair & House Painting

Johnny Bairstow749 05-Jul-2019

Home renovation and home painting are two very exciting things for homeowners. Whether the purpose is for a home makeover just to spice things up a bit or a home repair intended for preparing it for resale, it is important that you use the right methods and techniques in home repair and home painting.

Since it has always been the practice to make these useful improvements for the betterment of the property, the following tips we have gathered for you will surely help you achieve the best results. Continue reading and do not forget your pen and paper because you ought to take down notes of these surefire tips!


Home Repair Tip: Never Neglect Cracks and Gaps

As a responsible homeowner, it is your duty to maintain your house in an A-1 condition. One of the most common problems encountered by homeowners are the appearances of cracks and gaps that have potential adverse effects in the long run if not addressed properly and immediately. 

Not only can it cause a ballooning in your electricity and utility bills because of poor insulation especially during winters, but it can also cause a potential pest infestation if not repaired as soon as possible. 

Make sure that you address these gap and crack problems not just by simply putting on a coat of paint over them but by using the right maintenance materials. You can do plaster wall patching, using epoxy as seal or any other method suitable for the type of material or surface to be repaired. 


Painting Tip: Always Start With A Clean And Smooth Surface

Without a smooth surface as your base, you definitely cannot achieve that silky smooth paint finish. Before the repainting job, you need to smoothen out the surface first. Sanding works by leveling the surface on which the paint is to be spread. This ensures a smooth and equal distribution of color and depth. 

To do this, you can use primers, depending on the surface if it is wood, cement, concrete or any other material. Once the primer has dried, you can then use a good sanding sponge or a sanding material in order to dust off excess paint or other left out debris in the surface. 

Be careful though, as not all homes or surfaces are the same. For prefab homes, the panels are not made of the same materials as those making up the traditional stick-built homes. Most of the time their walls are made of vinyl or VOG panels. So it is important to research on what paint looks and stays best on these surfaces. 


Painting Tip: Cover All Your furniture Before Starting The Painting Process

Since you will not only be working on your painting quotes sydney but also on the prepping, it is the best idea to cover your furniture before the painting process.

Sometimes we have furniture inside our houses which are really large and very hard to move out of the house. The next wise move then is to cover them not only for the purpose of protecting them from unintentional stains caused by the painting.

Not only that, it also to protects the furniture from the sanding/prepping job that are usually done prior to the painting. As this sanding job produces many dust particles, covering the furniture will prevent it from being too dusty.


Home Repair Tip: Evaluate; Decide If Seeking Professional Help Is Better Than DIY-ing

A great way to save money is to DIY or to Do-It-Yourself. Some tasks and home repairs are manageable enough to enable us to do it ourselves. There are many reasons why we DIY. It may be because we have special skills and/or knowledge about the repair itself or it is just out of our budget to ask and hire professional help.

However, keep in mind that not all things are meant to be DIY-ed. Complicated home repairs like plumbing, chimney sweeping or pest control are just a few of such things.

While DIY-ing may save you from labor costs, the materials you will be using in the home repair could cost you more than if you had sought professional help. Factors such as bulk prices, absence of a trial-and-error phase and a more durable finish are things you should take into account when evaluating this.


Leave Comment

Comments

Liked By